1.Cabinet Material: The cabinet adopts double-layer structure with enough
reserved space between the internal lining panel and the external steel shell
for the connection, installation and maintenance of water, electricity and gas
wiring as well as those of fume hood pulley and counterweight system. The
external steel shell adopts 1.2 mm thickness molded plate and the cabinet
surface is featured as acid, alkali, other chemicals, damp, high-temperature and
wear resistant through electrostatic spraying treatment with epoxy resin
powder.
2. Coating Thickness: All the surface of steel panel for lab work bench
features strong corrosion resistant with the thickness no less than 50μM(±5%)
through even epoxy resin powder electrostatic spraying treatment.
3. Hood Door Panel: All the surface of the hood adopts 1.0 mm thickness
molded cold rolled plate and features acid, alkali, other chemicals, damp,
high-temperature and wear resistant through epoxy resin powder electrostatic
spraying treatment. All the hood door panels adopt double-layer soundproof
design.
4. Airflow Deflector: It adopts 6mm thickness gray compact laminate boards
with three-stage structure to prevent turbulence in the hood as well as to
ensure its good control performance of toxic and harmful substances and to
effectively discharge gases of different gravity.
5. Gas-collecting Hood: It adopts conical shrinking air structure with
rectangular opening at the bottom entrance and has the functions of good gas
gathering and noise reduction, etc.
6. Adjusting Door: It adopts 6mm thickness safety glass with balanced
combination. The lower part of the window door is equipped with a sliding door
handle to help the air to flow smoothly and to reduce possible turbulence. The
window adopts an advanced counterweight system which enables the sliding door
easy to pull, stop, lift and lower at any position. The balance part is designed
as endless structure. The operation glass is equipped with push and pull
function in both directions and open from the upper and down to achieve flexible
operation procedures and special safety experiments completion.
7. Internal Lining Panel: It adopts 6mm thickness gray compact laminate
boards with optional disassembled and replaceable door panel on both sides to
facilitate the installation and maintenance of water, electricity, gas and other
pipelines without necessarily disassembling the main structure of the fume
hood.
8. Steel Cable and Pulley Block: Each steel cable adopts 150kg bearing
capacity without breaking to ensure light, stable and long-term safety usage of
sliding door panel. The pulley block adopts multiple pulleys combination design
with the material of nylon and metal support.
9. Counterweight: It is equipped with silent track to limit and to avoid
shaking and collision during its up-down movement.
10. Footing: It adopts high-strength ABS adjustable feet combined with
stainless steel screw, nylon cover, rubber base and have the functions of
corrosion, vibration resistant and balance adjustment; Adjustment height range:
0~30mm.
